top of page
Tunnel Cover Fitting Guide
Overview
The tunnel kit is the perfect piece to start trimming up. There are no seams, no clips and you can be finished in an hour or so.
Download the fitting instructions here
Tools & Materials
Strong scissors or a sharp craft knife
Good quality solvent based contact adhesive e.g. Evostik (NOT spray adhesive)
Tips
Tip 1. In step 3, use just a little glue. You do not want it to soak into the foam.
Tip 2. When gluing the cover, apply glue to BOTH the cover AND the metal. This will give you the strong hold that you need.
Here are some more photos that should help.
bottom of page